Switching out your existing electrical outlets with USB outlets is a simple DIY project to upgrade your home, making it easier to charge your cell phone, iPad, and other consumer electronics.
In this video, I’ll walk you through the process of installing a USB outlet. I recommend using name brand components from a reputable manufacturer, this is not one you want to cheap out on for safety reasons.
Note: this how-to video applies only to the United States power grid / voltage.
*I am not a qualified electrician. Perform these tasks at your own risk, seek the expertise of a licensed professional and check your local code requirements before attempting anything you see in this video.*
SUBSCRIBE FOR NEW VIDEOS! http://bit.ly/2i588zC If you enjoyed this video, the best way to support making more like this is to subscribe. You’ll be notified about our latest videos – plus it’s free!
0:10 Tools Needed
0:40 Unboxing USB Outlets
1:43 Removing Electrical Outlet
3:18 Stripping Wires
4:07 Attaching Wires
5:51 Inserting into Wall
6:11 Wall Plate
DISCLAIMER: This video and description contains affiliate links for several different programs. As an Amazon Associate I earn from qualifying purchases.
Non-Contact Voltage Tester
Flat Head + Phillips Head Screwdrivers
USB OUTLET Leviton T5632-W 15-Amp Charger/Tamper Resistant Duplex Receptacle
Leviton 80301-SW 1-Gang Decora Plus Wallplate Screwless Snap-On Mount
Wire Stripping Tool / Wire Cutter
All content provided on Moore Approved channel/social media platforms is for informational/entertainment purposes only. The owner of Moore Approved makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site.
The owner of Moore Approved will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.